LCOV - code coverage report
Current view: top level - drivers/usb/storage - scsiglue.c (source / functions) Hit Total Coverage
Test: combined.info Lines: 6 185 3.2 %
Date: 2022-03-28 15:32:58 Functions: 1 16 6.2 %
Branches: 0 156 0.0 %

           Branch data     Line data    Source code
       1                 :            : // SPDX-License-Identifier: GPL-2.0+
       2                 :            : /*
       3                 :            :  * Driver for USB Mass Storage compliant devices
       4                 :            :  * SCSI layer glue code
       5                 :            :  *
       6                 :            :  * Current development and maintenance by:
       7                 :            :  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
       8                 :            :  *
       9                 :            :  * Developed with the assistance of:
      10                 :            :  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
      11                 :            :  *   (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
      12                 :            :  *
      13                 :            :  * Initial work by:
      14                 :            :  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
      15                 :            :  *
      16                 :            :  * This driver is based on the 'USB Mass Storage Class' document. This
      17                 :            :  * describes in detail the protocol used to communicate with such
      18                 :            :  * devices.  Clearly, the designers had SCSI and ATAPI commands in
      19                 :            :  * mind when they created this document.  The commands are all very
      20                 :            :  * similar to commands in the SCSI-II and ATAPI specifications.
      21                 :            :  *
      22                 :            :  * It is important to note that in a number of cases this class
      23                 :            :  * exhibits class-specific exemptions from the USB specification.
      24                 :            :  * Notably the usage of NAK, STALL and ACK differs from the norm, in
      25                 :            :  * that they are used to communicate wait, failed and OK on commands.
      26                 :            :  *
      27                 :            :  * Also, for certain devices, the interrupt endpoint is used to convey
      28                 :            :  * status of a command.
      29                 :            :  */
      30                 :            : 
      31                 :            : #include <linux/blkdev.h>
      32                 :            : #include <linux/dma-mapping.h>
      33                 :            : #include <linux/module.h>
      34                 :            : #include <linux/mutex.h>
      35                 :            : 
      36                 :            : #include <scsi/scsi.h>
      37                 :            : #include <scsi/scsi_cmnd.h>
      38                 :            : #include <scsi/scsi_devinfo.h>
      39                 :            : #include <scsi/scsi_device.h>
      40                 :            : #include <scsi/scsi_eh.h>
      41                 :            : 
      42                 :            : #include "usb.h"
      43                 :            : #include <linux/usb/hcd.h>
      44                 :            : #include "scsiglue.h"
      45                 :            : #include "debug.h"
      46                 :            : #include "transport.h"
      47                 :            : #include "protocol.h"
      48                 :            : 
      49                 :            : /*
      50                 :            :  * Vendor IDs for companies that seem to include the READ CAPACITY bug
      51                 :            :  * in all their devices
      52                 :            :  */
      53                 :            : #define VENDOR_ID_NOKIA         0x0421
      54                 :            : #define VENDOR_ID_NIKON         0x04b0
      55                 :            : #define VENDOR_ID_PENTAX        0x0a17
      56                 :            : #define VENDOR_ID_MOTOROLA      0x22b8
      57                 :            : 
      58                 :            : /***********************************************************************
      59                 :            :  * Host functions 
      60                 :            :  ***********************************************************************/
      61                 :            : 
      62                 :          0 : static const char* host_info(struct Scsi_Host *host)
      63                 :            : {
      64                 :          0 :         struct us_data *us = host_to_us(host);
      65                 :          0 :         return us->scsi_name;
      66                 :            : }
      67                 :            : 
      68                 :          0 : static int slave_alloc (struct scsi_device *sdev)
      69                 :            : {
      70                 :          0 :         struct us_data *us = host_to_us(sdev->host);
      71                 :            : 
      72                 :            :         /*
      73                 :            :          * Set the INQUIRY transfer length to 36.  We don't use any of
      74                 :            :          * the extra data and many devices choke if asked for more or
      75                 :            :          * less than 36 bytes.
      76                 :            :          */
      77                 :          0 :         sdev->inquiry_len = 36;
      78                 :            : 
      79                 :            :         /*
      80                 :            :          * Some host controllers may have alignment requirements.
      81                 :            :          * We'll play it safe by requiring 512-byte alignment always.
      82                 :            :          */
      83                 :          0 :         blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
      84                 :            : 
      85                 :            :         /* Tell the SCSI layer if we know there is more than one LUN */
      86   [ #  #  #  # ]:          0 :         if (us->protocol == USB_PR_BULK && us->max_lun > 0)
      87                 :          0 :                 sdev->sdev_bflags |= BLIST_FORCELUN;
      88                 :            : 
      89                 :          0 :         return 0;
      90                 :            : }
      91                 :            : 
      92                 :          0 : static int slave_configure(struct scsi_device *sdev)
      93                 :            : {
      94         [ #  # ]:          0 :         struct us_data *us = host_to_us(sdev->host);
      95                 :          0 :         struct device *dev = us->pusb_dev->bus->sysdev;
      96                 :            : 
      97                 :            :         /*
      98                 :            :          * Many devices have trouble transferring more than 32KB at a time,
      99                 :            :          * while others have trouble with more than 64K. At this time we
     100                 :            :          * are limiting both to 32K (64 sectores).
     101                 :            :          */
     102         [ #  # ]:          0 :         if (us->fflags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) {
     103                 :          0 :                 unsigned int max_sectors = 64;
     104                 :            : 
     105         [ #  # ]:          0 :                 if (us->fflags & US_FL_MAX_SECTORS_MIN)
     106                 :          0 :                         max_sectors = PAGE_SIZE >> 9;
     107         [ #  # ]:          0 :                 if (queue_max_hw_sectors(sdev->request_queue) > max_sectors)
     108                 :          0 :                         blk_queue_max_hw_sectors(sdev->request_queue,
     109                 :            :                                               max_sectors);
     110         [ #  # ]:          0 :         } else if (sdev->type == TYPE_TAPE) {
     111                 :            :                 /*
     112                 :            :                  * Tapes need much higher max_sector limits, so just
     113                 :            :                  * raise it to the maximum possible (4 GB / 512) and
     114                 :            :                  * let the queue segment size sort out the real limit.
     115                 :            :                  */
     116                 :          0 :                 blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF);
     117         [ #  # ]:          0 :         } else if (us->pusb_dev->speed >= USB_SPEED_SUPER) {
     118                 :            :                 /*
     119                 :            :                  * USB3 devices will be limited to 2048 sectors. This gives us
     120                 :            :                  * better throughput on most devices.
     121                 :            :                  */
     122                 :          0 :                 blk_queue_max_hw_sectors(sdev->request_queue, 2048);
     123                 :            :         }
     124                 :            : 
     125                 :            :         /*
     126                 :            :          * The max_hw_sectors should be up to maximum size of a mapping for
     127                 :            :          * the device. Otherwise, a DMA API might fail on swiotlb environment.
     128                 :            :          */
     129                 :          0 :         blk_queue_max_hw_sectors(sdev->request_queue,
     130                 :          0 :                 min_t(size_t, queue_max_hw_sectors(sdev->request_queue),
     131                 :            :                       dma_max_mapping_size(dev) >> SECTOR_SHIFT));
     132                 :            : 
     133                 :            :         /*
     134                 :            :          * Some USB host controllers can't do DMA; they have to use PIO.
     135                 :            :          * For such controllers we need to make sure the block layer sets
     136                 :            :          * up bounce buffers in addressable memory.
     137                 :            :          */
     138         [ #  # ]:          0 :         if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) ||
     139         [ #  # ]:          0 :                         (bus_to_hcd(us->pusb_dev->bus)->localmem_pool != NULL))
     140                 :          0 :                 blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
     141                 :            : 
     142                 :            :         /*
     143                 :            :          * We can't put these settings in slave_alloc() because that gets
     144                 :            :          * called before the device type is known.  Consequently these
     145                 :            :          * settings can't be overridden via the scsi devinfo mechanism.
     146                 :            :          */
     147         [ #  # ]:          0 :         if (sdev->type == TYPE_DISK) {
     148                 :            : 
     149                 :            :                 /*
     150                 :            :                  * Some vendors seem to put the READ CAPACITY bug into
     151                 :            :                  * all their devices -- primarily makers of cell phones
     152                 :            :                  * and digital cameras.  Since these devices always use
     153                 :            :                  * flash media and can be expected to have an even number
     154                 :            :                  * of sectors, we will always enable the CAPACITY_HEURISTICS
     155                 :            :                  * flag unless told otherwise.
     156                 :            :                  */
     157         [ #  # ]:          0 :                 switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) {
     158                 :          0 :                 case VENDOR_ID_NOKIA:
     159                 :            :                 case VENDOR_ID_NIKON:
     160                 :            :                 case VENDOR_ID_PENTAX:
     161                 :            :                 case VENDOR_ID_MOTOROLA:
     162         [ #  # ]:          0 :                         if (!(us->fflags & (US_FL_FIX_CAPACITY |
     163                 :            :                                         US_FL_CAPACITY_OK)))
     164                 :          0 :                                 us->fflags |= US_FL_CAPACITY_HEURISTICS;
     165                 :            :                         break;
     166                 :            :                 }
     167                 :            : 
     168                 :            :                 /*
     169                 :            :                  * Disk-type devices use MODE SENSE(6) if the protocol
     170                 :            :                  * (SubClass) is Transparent SCSI, otherwise they use
     171                 :            :                  * MODE SENSE(10).
     172                 :            :                  */
     173         [ #  # ]:          0 :                 if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
     174                 :          0 :                         sdev->use_10_for_ms = 1;
     175                 :            : 
     176                 :            :                 /*
     177                 :            :                  *Many disks only accept MODE SENSE transfer lengths of
     178                 :            :                  * 192 bytes (that's what Windows uses).
     179                 :            :                  */
     180                 :          0 :                 sdev->use_192_bytes_for_3f = 1;
     181                 :            : 
     182                 :            :                 /*
     183                 :            :                  * Some devices don't like MODE SENSE with page=0x3f,
     184                 :            :                  * which is the command used for checking if a device
     185                 :            :                  * is write-protected.  Now that we tell the sd driver
     186                 :            :                  * to do a 192-byte transfer with this command the
     187                 :            :                  * majority of devices work fine, but a few still can't
     188                 :            :                  * handle it.  The sd driver will simply assume those
     189                 :            :                  * devices are write-enabled.
     190                 :            :                  */
     191         [ #  # ]:          0 :                 if (us->fflags & US_FL_NO_WP_DETECT)
     192                 :          0 :                         sdev->skip_ms_page_3f = 1;
     193                 :            : 
     194                 :            :                 /*
     195                 :            :                  * A number of devices have problems with MODE SENSE for
     196                 :            :                  * page x08, so we will skip it.
     197                 :            :                  */
     198                 :          0 :                 sdev->skip_ms_page_8 = 1;
     199                 :            : 
     200                 :            :                 /*
     201                 :            :                  * Some devices don't handle VPD pages correctly, so skip vpd
     202                 :            :                  * pages if not forced by SCSI layer.
     203                 :            :                  */
     204                 :          0 :                 sdev->skip_vpd_pages = !sdev->try_vpd_pages;
     205                 :            : 
     206                 :            :                 /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */
     207                 :          0 :                 sdev->no_report_opcodes = 1;
     208                 :            : 
     209                 :            :                 /* Do not attempt to use WRITE SAME */
     210                 :          0 :                 sdev->no_write_same = 1;
     211                 :            : 
     212                 :            :                 /*
     213                 :            :                  * Some disks return the total number of blocks in response
     214                 :            :                  * to READ CAPACITY rather than the highest block number.
     215                 :            :                  * If this device makes that mistake, tell the sd driver.
     216                 :            :                  */
     217         [ #  # ]:          0 :                 if (us->fflags & US_FL_FIX_CAPACITY)
     218                 :          0 :                         sdev->fix_capacity = 1;
     219                 :            : 
     220                 :            :                 /*
     221                 :            :                  * A few disks have two indistinguishable version, one of
     222                 :            :                  * which reports the correct capacity and the other does not.
     223                 :            :                  * The sd driver has to guess which is the case.
     224                 :            :                  */
     225         [ #  # ]:          0 :                 if (us->fflags & US_FL_CAPACITY_HEURISTICS)
     226                 :          0 :                         sdev->guess_capacity = 1;
     227                 :            : 
     228                 :            :                 /* Some devices cannot handle READ_CAPACITY_16 */
     229         [ #  # ]:          0 :                 if (us->fflags & US_FL_NO_READ_CAPACITY_16)
     230                 :          0 :                         sdev->no_read_capacity_16 = 1;
     231                 :            : 
     232                 :            :                 /*
     233                 :            :                  * Many devices do not respond properly to READ_CAPACITY_16.
     234                 :            :                  * Tell the SCSI layer to try READ_CAPACITY_10 first.
     235                 :            :                  * However some USB 3.0 drive enclosures return capacity
     236                 :            :                  * modulo 2TB. Those must use READ_CAPACITY_16
     237                 :            :                  */
     238         [ #  # ]:          0 :                 if (!(us->fflags & US_FL_NEEDS_CAP16))
     239                 :          0 :                         sdev->try_rc_10_first = 1;
     240                 :            : 
     241                 :            :                 /*
     242                 :            :                  * assume SPC3 or latter devices support sense size > 18
     243                 :            :                  * unless US_FL_BAD_SENSE quirk is specified.
     244                 :            :                  */
     245         [ #  # ]:          0 :                 if (sdev->scsi_level > SCSI_SPC_2 &&
     246         [ #  # ]:          0 :                     !(us->fflags & US_FL_BAD_SENSE))
     247                 :          0 :                         us->fflags |= US_FL_SANE_SENSE;
     248                 :            : 
     249                 :            :                 /*
     250                 :            :                  * USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
     251                 :            :                  * Hardware Error) when any low-level error occurs,
     252                 :            :                  * recoverable or not.  Setting this flag tells the SCSI
     253                 :            :                  * midlayer to retry such commands, which frequently will
     254                 :            :                  * succeed and fix the error.  The worst this can lead to
     255                 :            :                  * is an occasional series of retries that will all fail.
     256                 :            :                  */
     257                 :          0 :                 sdev->retry_hwerror = 1;
     258                 :            : 
     259                 :            :                 /*
     260                 :            :                  * USB disks should allow restart.  Some drives spin down
     261                 :            :                  * automatically, requiring a START-STOP UNIT command.
     262                 :            :                  */
     263                 :          0 :                 sdev->allow_restart = 1;
     264                 :            : 
     265                 :            :                 /*
     266                 :            :                  * Some USB cardreaders have trouble reading an sdcard's last
     267                 :            :                  * sector in a larger then 1 sector read, since the performance
     268                 :            :                  * impact is negligible we set this flag for all USB disks
     269                 :            :                  */
     270                 :          0 :                 sdev->last_sector_bug = 1;
     271                 :            : 
     272                 :            :                 /*
     273                 :            :                  * Enable last-sector hacks for single-target devices using
     274                 :            :                  * the Bulk-only transport, unless we already know the
     275                 :            :                  * capacity will be decremented or is correct.
     276                 :            :                  */
     277         [ #  # ]:          0 :                 if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
     278                 :          0 :                                         US_FL_SCM_MULT_TARG)) &&
     279         [ #  # ]:          0 :                                 us->protocol == USB_PR_BULK)
     280                 :          0 :                         us->use_last_sector_hacks = 1;
     281                 :            : 
     282                 :            :                 /* Check if write cache default on flag is set or not */
     283         [ #  # ]:          0 :                 if (us->fflags & US_FL_WRITE_CACHE)
     284                 :          0 :                         sdev->wce_default_on = 1;
     285                 :            : 
     286                 :            :                 /* A few buggy USB-ATA bridges don't understand FUA */
     287         [ #  # ]:          0 :                 if (us->fflags & US_FL_BROKEN_FUA)
     288                 :          0 :                         sdev->broken_fua = 1;
     289                 :            : 
     290                 :            :                 /* Some even totally fail to indicate a cache */
     291         [ #  # ]:          0 :                 if (us->fflags & US_FL_ALWAYS_SYNC) {
     292                 :            :                         /* don't read caching information */
     293                 :          0 :                         sdev->skip_ms_page_8 = 1;
     294                 :          0 :                         sdev->skip_ms_page_3f = 1;
     295                 :            :                         /* assume sync is needed */
     296                 :          0 :                         sdev->wce_default_on = 1;
     297                 :            :                 }
     298                 :            :         } else {
     299                 :            : 
     300                 :            :                 /*
     301                 :            :                  * Non-disk-type devices don't need to blacklist any pages
     302                 :            :                  * or to force 192-byte transfer lengths for MODE SENSE.
     303                 :            :                  * But they do need to use MODE SENSE(10).
     304                 :            :                  */
     305                 :          0 :                 sdev->use_10_for_ms = 1;
     306                 :            : 
     307                 :            :                 /* Some (fake) usb cdrom devices don't like READ_DISC_INFO */
     308         [ #  # ]:          0 :                 if (us->fflags & US_FL_NO_READ_DISC_INFO)
     309                 :          0 :                         sdev->no_read_disc_info = 1;
     310                 :            :         }
     311                 :            : 
     312                 :            :         /*
     313                 :            :          * The CB and CBI transports have no way to pass LUN values
     314                 :            :          * other than the bits in the second byte of a CDB.  But those
     315                 :            :          * bits don't get set to the LUN value if the device reports
     316                 :            :          * scsi_level == 0 (UNKNOWN).  Hence such devices must necessarily
     317                 :            :          * be single-LUN.
     318                 :            :          */
     319         [ #  # ]:          0 :         if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
     320         [ #  # ]:          0 :                         sdev->scsi_level == SCSI_UNKNOWN)
     321                 :          0 :                 us->max_lun = 0;
     322                 :            : 
     323                 :            :         /*
     324                 :            :          * Some devices choke when they receive a PREVENT-ALLOW MEDIUM
     325                 :            :          * REMOVAL command, so suppress those commands.
     326                 :            :          */
     327         [ #  # ]:          0 :         if (us->fflags & US_FL_NOT_LOCKABLE)
     328                 :          0 :                 sdev->lockable = 0;
     329                 :            : 
     330                 :            :         /*
     331                 :            :          * this is to satisfy the compiler, tho I don't think the 
     332                 :            :          * return code is ever checked anywhere.
     333                 :            :          */
     334                 :          0 :         return 0;
     335                 :            : }
     336                 :            : 
     337                 :          0 : static int target_alloc(struct scsi_target *starget)
     338                 :            : {
     339                 :          0 :         struct us_data *us = host_to_us(dev_to_shost(starget->dev.parent));
     340                 :            : 
     341                 :            :         /*
     342                 :            :          * Some USB drives don't support REPORT LUNS, even though they
     343                 :            :          * report a SCSI revision level above 2.  Tell the SCSI layer
     344                 :            :          * not to issue that command; it will perform a normal sequential
     345                 :            :          * scan instead.
     346                 :            :          */
     347                 :          0 :         starget->no_report_luns = 1;
     348                 :            : 
     349                 :            :         /*
     350                 :            :          * The UFI spec treats the Peripheral Qualifier bits in an
     351                 :            :          * INQUIRY result as reserved and requires devices to set them
     352                 :            :          * to 0.  However the SCSI spec requires these bits to be set
     353                 :            :          * to 3 to indicate when a LUN is not present.
     354                 :            :          *
     355                 :            :          * Let the scanning code know if this target merely sets
     356                 :            :          * Peripheral Device Type to 0x1f to indicate no LUN.
     357                 :            :          */
     358         [ #  # ]:          0 :         if (us->subclass == USB_SC_UFI)
     359                 :          0 :                 starget->pdt_1f_for_no_lun = 1;
     360                 :            : 
     361                 :          0 :         return 0;
     362                 :            : }
     363                 :            : 
     364                 :            : /* queue a command */
     365                 :            : /* This is always called with scsi_lock(host) held */
     366                 :          0 : static int queuecommand_lck(struct scsi_cmnd *srb,
     367                 :            :                         void (*done)(struct scsi_cmnd *))
     368                 :            : {
     369         [ #  # ]:          0 :         struct us_data *us = host_to_us(srb->device->host);
     370                 :            : 
     371                 :            :         /* check for state-transition errors */
     372         [ #  # ]:          0 :         if (us->srb != NULL) {
     373                 :          0 :                 dev_err(&us->pusb_intf->dev,
     374                 :            :                         "Error in %s: us->srb = %p\n", __func__, us->srb);
     375                 :          0 :                 return SCSI_MLQUEUE_HOST_BUSY;
     376                 :            :         }
     377                 :            : 
     378                 :            :         /* fail the command if we are disconnecting */
     379         [ #  # ]:          0 :         if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
     380                 :          0 :                 usb_stor_dbg(us, "Fail command during disconnect\n");
     381                 :          0 :                 srb->result = DID_NO_CONNECT << 16;
     382                 :          0 :                 done(srb);
     383                 :          0 :                 return 0;
     384                 :            :         }
     385                 :            : 
     386         [ #  # ]:          0 :         if ((us->fflags & US_FL_NO_ATA_1X) &&
     387         [ #  # ]:          0 :                         (srb->cmnd[0] == ATA_12 || srb->cmnd[0] == ATA_16)) {
     388                 :          0 :                 memcpy(srb->sense_buffer, usb_stor_sense_invalidCDB,
     389                 :            :                        sizeof(usb_stor_sense_invalidCDB));
     390                 :          0 :                 srb->result = SAM_STAT_CHECK_CONDITION;
     391                 :          0 :                 done(srb);
     392                 :          0 :                 return 0;
     393                 :            :         }
     394                 :            : 
     395                 :            :         /* enqueue the command and wake up the control thread */
     396                 :          0 :         srb->scsi_done = done;
     397                 :          0 :         us->srb = srb;
     398                 :          0 :         complete(&us->cmnd_ready);
     399                 :            : 
     400                 :          0 :         return 0;
     401                 :            : }
     402                 :            : 
     403                 :          0 : static DEF_SCSI_QCMD(queuecommand)
     404                 :            : 
     405                 :            : /***********************************************************************
     406                 :            :  * Error handling functions
     407                 :            :  ***********************************************************************/
     408                 :            : 
     409                 :            : /* Command timeout and abort */
     410                 :          0 : static int command_abort(struct scsi_cmnd *srb)
     411                 :            : {
     412                 :          0 :         struct us_data *us = host_to_us(srb->device->host);
     413                 :            : 
     414                 :          0 :         usb_stor_dbg(us, "%s called\n", __func__);
     415                 :            : 
     416                 :            :         /*
     417                 :            :          * us->srb together with the TIMED_OUT, RESETTING, and ABORTING
     418                 :            :          * bits are protected by the host lock.
     419                 :            :          */
     420                 :          0 :         scsi_lock(us_to_host(us));
     421                 :            : 
     422                 :            :         /* Is this command still active? */
     423         [ #  # ]:          0 :         if (us->srb != srb) {
     424                 :          0 :                 scsi_unlock(us_to_host(us));
     425                 :          0 :                 usb_stor_dbg(us, "-- nothing to abort\n");
     426                 :          0 :                 return FAILED;
     427                 :            :         }
     428                 :            : 
     429                 :            :         /*
     430                 :            :          * Set the TIMED_OUT bit.  Also set the ABORTING bit, but only if
     431                 :            :          * a device reset isn't already in progress (to avoid interfering
     432                 :            :          * with the reset).  Note that we must retain the host lock while
     433                 :            :          * calling usb_stor_stop_transport(); otherwise it might interfere
     434                 :            :          * with an auto-reset that begins as soon as we release the lock.
     435                 :            :          */
     436                 :          0 :         set_bit(US_FLIDX_TIMED_OUT, &us->dflags);
     437         [ #  # ]:          0 :         if (!test_bit(US_FLIDX_RESETTING, &us->dflags)) {
     438                 :          0 :                 set_bit(US_FLIDX_ABORTING, &us->dflags);
     439                 :          0 :                 usb_stor_stop_transport(us);
     440                 :            :         }
     441                 :          0 :         scsi_unlock(us_to_host(us));
     442                 :            : 
     443                 :            :         /* Wait for the aborted command to finish */
     444                 :          0 :         wait_for_completion(&us->notify);
     445                 :          0 :         return SUCCESS;
     446                 :            : }
     447                 :            : 
     448                 :            : /*
     449                 :            :  * This invokes the transport reset mechanism to reset the state of the
     450                 :            :  * device
     451                 :            :  */
     452                 :          0 : static int device_reset(struct scsi_cmnd *srb)
     453                 :            : {
     454                 :          0 :         struct us_data *us = host_to_us(srb->device->host);
     455                 :          0 :         int result;
     456                 :            : 
     457                 :          0 :         usb_stor_dbg(us, "%s called\n", __func__);
     458                 :            : 
     459                 :            :         /* lock the device pointers and do the reset */
     460                 :          0 :         mutex_lock(&(us->dev_mutex));
     461                 :          0 :         result = us->transport_reset(us);
     462                 :          0 :         mutex_unlock(&us->dev_mutex);
     463                 :            : 
     464         [ #  # ]:          0 :         return result < 0 ? FAILED : SUCCESS;
     465                 :            : }
     466                 :            : 
     467                 :            : /* Simulate a SCSI bus reset by resetting the device's USB port. */
     468                 :          0 : static int bus_reset(struct scsi_cmnd *srb)
     469                 :            : {
     470                 :          0 :         struct us_data *us = host_to_us(srb->device->host);
     471                 :          0 :         int result;
     472                 :            : 
     473                 :          0 :         usb_stor_dbg(us, "%s called\n", __func__);
     474                 :            : 
     475                 :          0 :         result = usb_stor_port_reset(us);
     476         [ #  # ]:          0 :         return result < 0 ? FAILED : SUCCESS;
     477                 :            : }
     478                 :            : 
     479                 :            : /*
     480                 :            :  * Report a driver-initiated device reset to the SCSI layer.
     481                 :            :  * Calling this for a SCSI-initiated reset is unnecessary but harmless.
     482                 :            :  * The caller must own the SCSI host lock.
     483                 :            :  */
     484                 :          0 : void usb_stor_report_device_reset(struct us_data *us)
     485                 :            : {
     486                 :          0 :         int i;
     487                 :          0 :         struct Scsi_Host *host = us_to_host(us);
     488                 :            : 
     489                 :          0 :         scsi_report_device_reset(host, 0, 0);
     490         [ #  # ]:          0 :         if (us->fflags & US_FL_SCM_MULT_TARG) {
     491         [ #  # ]:          0 :                 for (i = 1; i < host->max_id; ++i)
     492                 :          0 :                         scsi_report_device_reset(host, 0, i);
     493                 :            :         }
     494                 :          0 : }
     495                 :            : 
     496                 :            : /*
     497                 :            :  * Report a driver-initiated bus reset to the SCSI layer.
     498                 :            :  * Calling this for a SCSI-initiated reset is unnecessary but harmless.
     499                 :            :  * The caller must not own the SCSI host lock.
     500                 :            :  */
     501                 :          0 : void usb_stor_report_bus_reset(struct us_data *us)
     502                 :            : {
     503                 :          0 :         struct Scsi_Host *host = us_to_host(us);
     504                 :            : 
     505                 :          0 :         scsi_lock(host);
     506                 :          0 :         scsi_report_bus_reset(host, 0);
     507                 :          0 :         scsi_unlock(host);
     508                 :          0 : }
     509                 :            : 
     510                 :            : /***********************************************************************
     511                 :            :  * /proc/scsi/ functions
     512                 :            :  ***********************************************************************/
     513                 :            : 
     514                 :          0 : static int write_info(struct Scsi_Host *host, char *buffer, int length)
     515                 :            : {
     516                 :            :         /* if someone is sending us data, just throw it away */
     517                 :          0 :         return length;
     518                 :            : }
     519                 :            : 
     520                 :          0 : static int show_info (struct seq_file *m, struct Scsi_Host *host)
     521                 :            : {
     522                 :          0 :         struct us_data *us = host_to_us(host);
     523                 :          0 :         const char *string;
     524                 :            : 
     525                 :            :         /* print the controller name */
     526                 :          0 :         seq_printf(m, "   Host scsi%d: usb-storage\n", host->host_no);
     527                 :            : 
     528                 :            :         /* print product, vendor, and serial number strings */
     529         [ #  # ]:          0 :         if (us->pusb_dev->manufacturer)
     530                 :            :                 string = us->pusb_dev->manufacturer;
     531         [ #  # ]:          0 :         else if (us->unusual_dev->vendorName)
     532                 :          0 :                 string = us->unusual_dev->vendorName;
     533                 :            :         else
     534                 :            :                 string = "Unknown";
     535                 :          0 :         seq_printf(m, "       Vendor: %s\n", string);
     536         [ #  # ]:          0 :         if (us->pusb_dev->product)
     537                 :            :                 string = us->pusb_dev->product;
     538         [ #  # ]:          0 :         else if (us->unusual_dev->productName)
     539                 :          0 :                 string = us->unusual_dev->productName;
     540                 :            :         else
     541                 :            :                 string = "Unknown";
     542                 :          0 :         seq_printf(m, "      Product: %s\n", string);
     543         [ #  # ]:          0 :         if (us->pusb_dev->serial)
     544                 :          0 :                 string = us->pusb_dev->serial;
     545                 :            :         else
     546                 :            :                 string = "None";
     547                 :          0 :         seq_printf(m, "Serial Number: %s\n", string);
     548                 :            : 
     549                 :            :         /* show the protocol and transport */
     550                 :          0 :         seq_printf(m, "     Protocol: %s\n", us->protocol_name);
     551                 :          0 :         seq_printf(m, "    Transport: %s\n", us->transport_name);
     552                 :            : 
     553                 :            :         /* show the device flags */
     554                 :          0 :         seq_printf(m, "       Quirks:");
     555                 :            : 
     556                 :            : #define US_FLAG(name, value) \
     557                 :            :         if (us->fflags & value) seq_printf(m, " " #name);
     558   [ #  #  #  #  :          0 : US_DO_ALL_FLAGS
          #  #  #  #  #  
          #  #  #  #  #  
          #  #  #  #  #  
          #  #  #  #  #  
          #  #  #  #  #  
          #  #  #  #  #  
          #  #  #  #  #  
          #  #  #  #  #  
          #  #  #  #  #  
          #  #  #  #  #  
          #  #  #  #  #  
                      # ]
     559                 :            : #undef US_FLAG
     560                 :          0 :         seq_putc(m, '\n');
     561                 :          0 :         return 0;
     562                 :            : }
     563                 :            : 
     564                 :            : /***********************************************************************
     565                 :            :  * Sysfs interface
     566                 :            :  ***********************************************************************/
     567                 :            : 
     568                 :            : /* Output routine for the sysfs max_sectors file */
     569                 :          0 : static ssize_t max_sectors_show(struct device *dev, struct device_attribute *attr, char *buf)
     570                 :            : {
     571                 :          0 :         struct scsi_device *sdev = to_scsi_device(dev);
     572                 :            : 
     573                 :          0 :         return sprintf(buf, "%u\n", queue_max_hw_sectors(sdev->request_queue));
     574                 :            : }
     575                 :            : 
     576                 :            : /* Input routine for the sysfs max_sectors file */
     577                 :          0 : static ssize_t max_sectors_store(struct device *dev, struct device_attribute *attr, const char *buf,
     578                 :            :                 size_t count)
     579                 :            : {
     580                 :          0 :         struct scsi_device *sdev = to_scsi_device(dev);
     581                 :          0 :         unsigned short ms;
     582                 :            : 
     583         [ #  # ]:          0 :         if (sscanf(buf, "%hu", &ms) > 0) {
     584                 :          0 :                 blk_queue_max_hw_sectors(sdev->request_queue, ms);
     585                 :          0 :                 return count;
     586                 :            :         }
     587                 :            :         return -EINVAL;
     588                 :            : }
     589                 :            : static DEVICE_ATTR_RW(max_sectors);
     590                 :            : 
     591                 :            : static struct device_attribute *sysfs_device_attr_list[] = {
     592                 :            :         &dev_attr_max_sectors,
     593                 :            :         NULL,
     594                 :            : };
     595                 :            : 
     596                 :            : /*
     597                 :            :  * this defines our host template, with which we'll allocate hosts
     598                 :            :  */
     599                 :            : 
     600                 :            : static const struct scsi_host_template usb_stor_host_template = {
     601                 :            :         /* basic userland interface stuff */
     602                 :            :         .name =                         "usb-storage",
     603                 :            :         .proc_name =                    "usb-storage",
     604                 :            :         .show_info =                    show_info,
     605                 :            :         .write_info =                   write_info,
     606                 :            :         .info =                         host_info,
     607                 :            : 
     608                 :            :         /* command interface -- queued only */
     609                 :            :         .queuecommand =                 queuecommand,
     610                 :            : 
     611                 :            :         /* error and abort handlers */
     612                 :            :         .eh_abort_handler =             command_abort,
     613                 :            :         .eh_device_reset_handler =      device_reset,
     614                 :            :         .eh_bus_reset_handler =         bus_reset,
     615                 :            : 
     616                 :            :         /* queue commands only, only one command per LUN */
     617                 :            :         .can_queue =                    1,
     618                 :            : 
     619                 :            :         /* unknown initiator id */
     620                 :            :         .this_id =                      -1,
     621                 :            : 
     622                 :            :         .slave_alloc =                  slave_alloc,
     623                 :            :         .slave_configure =              slave_configure,
     624                 :            :         .target_alloc =                 target_alloc,
     625                 :            : 
     626                 :            :         /* lots of sg segments can be handled */
     627                 :            :         .sg_tablesize =                 SG_MAX_SEGMENTS,
     628                 :            : 
     629                 :            : 
     630                 :            :         /*
     631                 :            :          * Limit the total size of a transfer to 120 KB.
     632                 :            :          *
     633                 :            :          * Some devices are known to choke with anything larger. It seems like
     634                 :            :          * the problem stems from the fact that original IDE controllers had
     635                 :            :          * only an 8-bit register to hold the number of sectors in one transfer
     636                 :            :          * and even those couldn't handle a full 256 sectors.
     637                 :            :          *
     638                 :            :          * Because we want to make sure we interoperate with as many devices as
     639                 :            :          * possible, we will maintain a 240 sector transfer size limit for USB
     640                 :            :          * Mass Storage devices.
     641                 :            :          *
     642                 :            :          * Tests show that other operating have similar limits with Microsoft
     643                 :            :          * Windows 7 limiting transfers to 128 sectors for both USB2 and USB3
     644                 :            :          * and Apple Mac OS X 10.11 limiting transfers to 256 sectors for USB2
     645                 :            :          * and 2048 for USB3 devices.
     646                 :            :          */
     647                 :            :         .max_sectors =                  240,
     648                 :            : 
     649                 :            :         /* emulated HBA */
     650                 :            :         .emulated =                     1,
     651                 :            : 
     652                 :            :         /* we do our own delay after a device or bus reset */
     653                 :            :         .skip_settle_delay =            1,
     654                 :            : 
     655                 :            :         /* sysfs device attributes */
     656                 :            :         .sdev_attrs =                   sysfs_device_attr_list,
     657                 :            : 
     658                 :            :         /* module management */
     659                 :            :         .module =                       THIS_MODULE
     660                 :            : };
     661                 :            : 
     662                 :         28 : void usb_stor_host_template_init(struct scsi_host_template *sht,
     663                 :            :                                  const char *name, struct module *owner)
     664                 :            : {
     665                 :         28 :         *sht = usb_stor_host_template;
     666                 :         28 :         sht->name = name;
     667                 :         28 :         sht->proc_name = name;
     668                 :         28 :         sht->module = owner;
     669                 :         28 : }
     670                 :            : EXPORT_SYMBOL_GPL(usb_stor_host_template_init);
     671                 :            : 
     672                 :            : /* To Report "Illegal Request: Invalid Field in CDB */
     673                 :            : unsigned char usb_stor_sense_invalidCDB[18] = {
     674                 :            :         [0]     = 0x70,                     /* current error */
     675                 :            :         [2]     = ILLEGAL_REQUEST,          /* Illegal Request = 0x05 */
     676                 :            :         [7]     = 0x0a,                     /* additional length */
     677                 :            :         [12]    = 0x24                      /* Invalid Field in CDB */
     678                 :            : };
     679                 :            : EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB);

Generated by: LCOV version 1.14