LCOV - code coverage report
Current view: top level - drivers/scsi - scsi.c (source / functions) Hit Total Coverage
Test: gcov_data_raspi2_real_modules_combined.info Lines: 13 185 7.0 %
Date: 2020-09-30 20:25:40 Functions: 1 21 4.8 %
Branches: 5 148 3.4 %

           Branch data     Line data    Source code
       1                 :            : // SPDX-License-Identifier: GPL-2.0-only
       2                 :            : /*
       3                 :            :  *  scsi.c Copyright (C) 1992 Drew Eckhardt
       4                 :            :  *         Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
       5                 :            :  *         Copyright (C) 2002, 2003 Christoph Hellwig
       6                 :            :  *
       7                 :            :  *  generic mid-level SCSI driver
       8                 :            :  *      Initial versions: Drew Eckhardt
       9                 :            :  *      Subsequent revisions: Eric Youngdale
      10                 :            :  *
      11                 :            :  *  <drew@colorado.edu>
      12                 :            :  *
      13                 :            :  *  Bug correction thanks go to :
      14                 :            :  *      Rik Faith <faith@cs.unc.edu>
      15                 :            :  *      Tommy Thorn <tthorn>
      16                 :            :  *      Thomas Wuensche <tw@fgb1.fgb.mw.tu-muenchen.de>
      17                 :            :  *
      18                 :            :  *  Modified by Eric Youngdale eric@andante.org or ericy@gnu.ai.mit.edu to
      19                 :            :  *  add scatter-gather, multiple outstanding request, and other
      20                 :            :  *  enhancements.
      21                 :            :  *
      22                 :            :  *  Native multichannel, wide scsi, /proc/scsi and hot plugging
      23                 :            :  *  support added by Michael Neuffer <mike@i-connect.net>
      24                 :            :  *
      25                 :            :  *  Added request_module("scsi_hostadapter") for kerneld:
      26                 :            :  *  (Put an "alias scsi_hostadapter your_hostadapter" in /etc/modprobe.conf)
      27                 :            :  *  Bjorn Ekwall  <bj0rn@blox.se>
      28                 :            :  *  (changed to kmod)
      29                 :            :  *
      30                 :            :  *  Major improvements to the timeout, abort, and reset processing,
      31                 :            :  *  as well as performance modifications for large queue depths by
      32                 :            :  *  Leonard N. Zubkoff <lnz@dandelion.com>
      33                 :            :  *
      34                 :            :  *  Converted cli() code to spinlocks, Ingo Molnar
      35                 :            :  *
      36                 :            :  *  Jiffies wrap fixes (host->resetting), 3 Dec 1998 Andrea Arcangeli
      37                 :            :  *
      38                 :            :  *  out_of_space hacks, D. Gilbert (dpg) 990608
      39                 :            :  */
      40                 :            : 
      41                 :            : #include <linux/module.h>
      42                 :            : #include <linux/moduleparam.h>
      43                 :            : #include <linux/kernel.h>
      44                 :            : #include <linux/timer.h>
      45                 :            : #include <linux/string.h>
      46                 :            : #include <linux/slab.h>
      47                 :            : #include <linux/blkdev.h>
      48                 :            : #include <linux/delay.h>
      49                 :            : #include <linux/init.h>
      50                 :            : #include <linux/completion.h>
      51                 :            : #include <linux/unistd.h>
      52                 :            : #include <linux/spinlock.h>
      53                 :            : #include <linux/kmod.h>
      54                 :            : #include <linux/interrupt.h>
      55                 :            : #include <linux/notifier.h>
      56                 :            : #include <linux/cpu.h>
      57                 :            : #include <linux/mutex.h>
      58                 :            : #include <linux/async.h>
      59                 :            : #include <asm/unaligned.h>
      60                 :            : 
      61                 :            : #include <scsi/scsi.h>
      62                 :            : #include <scsi/scsi_cmnd.h>
      63                 :            : #include <scsi/scsi_dbg.h>
      64                 :            : #include <scsi/scsi_device.h>
      65                 :            : #include <scsi/scsi_driver.h>
      66                 :            : #include <scsi/scsi_eh.h>
      67                 :            : #include <scsi/scsi_host.h>
      68                 :            : #include <scsi/scsi_tcq.h>
      69                 :            : 
      70                 :            : #include "scsi_priv.h"
      71                 :            : #include "scsi_logging.h"
      72                 :            : 
      73                 :            : #define CREATE_TRACE_POINTS
      74                 :            : #include <trace/events/scsi.h>
      75                 :            : 
      76                 :            : /*
      77                 :            :  * Definitions and constants.
      78                 :            :  */
      79                 :            : 
      80                 :            : /*
      81                 :            :  * Note - the initial logging level can be set here to log events at boot time.
      82                 :            :  * After the system is up, you may enable logging via the /proc interface.
      83                 :            :  */
      84                 :            : unsigned int scsi_logging_level;
      85                 :            : #if defined(CONFIG_SCSI_LOGGING)
      86                 :            : EXPORT_SYMBOL(scsi_logging_level);
      87                 :            : #endif
      88                 :            : 
      89                 :            : /*
      90                 :            :  * Domain for asynchronous system resume operations.  It is marked 'exclusive'
      91                 :            :  * to avoid being included in the async_synchronize_full() that is invoked by
      92                 :            :  * dpm_resume().
      93                 :            :  */
      94                 :            : ASYNC_DOMAIN_EXCLUSIVE(scsi_sd_pm_domain);
      95                 :            : EXPORT_SYMBOL(scsi_sd_pm_domain);
      96                 :            : 
      97                 :            : /**
      98                 :            :  * scsi_put_command - Free a scsi command block
      99                 :            :  * @cmd: command block to free
     100                 :            :  *
     101                 :            :  * Returns:     Nothing.
     102                 :            :  *
     103                 :            :  * Notes:       The command must not belong to any lists.
     104                 :            :  */
     105                 :          0 : void scsi_put_command(struct scsi_cmnd *cmd)
     106                 :            : {
     107                 :          0 :         scsi_del_cmd_from_list(cmd);
     108         [ #  # ]:          0 :         BUG_ON(delayed_work_pending(&cmd->abort_work));
     109                 :          0 : }
     110                 :            : 
     111                 :            : #ifdef CONFIG_SCSI_LOGGING
     112                 :            : void scsi_log_send(struct scsi_cmnd *cmd)
     113                 :            : {
     114                 :            :         unsigned int level;
     115                 :            : 
     116                 :            :         /*
     117                 :            :          * If ML QUEUE log level is greater than or equal to:
     118                 :            :          *
     119                 :            :          * 1: nothing (match completion)
     120                 :            :          *
     121                 :            :          * 2: log opcode + command of all commands + cmd address
     122                 :            :          *
     123                 :            :          * 3: same as 2
     124                 :            :          *
     125                 :            :          * 4: same as 3
     126                 :            :          */
     127                 :            :         if (unlikely(scsi_logging_level)) {
     128                 :            :                 level = SCSI_LOG_LEVEL(SCSI_LOG_MLQUEUE_SHIFT,
     129                 :            :                                        SCSI_LOG_MLQUEUE_BITS);
     130                 :            :                 if (level > 1) {
     131                 :            :                         scmd_printk(KERN_INFO, cmd,
     132                 :            :                                     "Send: scmd 0x%p\n", cmd);
     133                 :            :                         scsi_print_command(cmd);
     134                 :            :                 }
     135                 :            :         }
     136                 :            : }
     137                 :            : 
     138                 :            : void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
     139                 :            : {
     140                 :            :         unsigned int level;
     141                 :            : 
     142                 :            :         /*
     143                 :            :          * If ML COMPLETE log level is greater than or equal to:
     144                 :            :          *
     145                 :            :          * 1: log disposition, result, opcode + command, and conditionally
     146                 :            :          * sense data for failures or non SUCCESS dispositions.
     147                 :            :          *
     148                 :            :          * 2: same as 1 but for all command completions.
     149                 :            :          *
     150                 :            :          * 3: same as 2
     151                 :            :          *
     152                 :            :          * 4: same as 3 plus dump extra junk
     153                 :            :          */
     154                 :            :         if (unlikely(scsi_logging_level)) {
     155                 :            :                 level = SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT,
     156                 :            :                                        SCSI_LOG_MLCOMPLETE_BITS);
     157                 :            :                 if (((level > 0) && (cmd->result || disposition != SUCCESS)) ||
     158                 :            :                     (level > 1)) {
     159                 :            :                         scsi_print_result(cmd, "Done", disposition);
     160                 :            :                         scsi_print_command(cmd);
     161                 :            :                         if (status_byte(cmd->result) == CHECK_CONDITION)
     162                 :            :                                 scsi_print_sense(cmd);
     163                 :            :                         if (level > 3)
     164                 :            :                                 scmd_printk(KERN_INFO, cmd,
     165                 :            :                                             "scsi host busy %d failed %d\n",
     166                 :            :                                             scsi_host_busy(cmd->device->host),
     167                 :            :                                             cmd->device->host->host_failed);
     168                 :            :                 }
     169                 :            :         }
     170                 :            : }
     171                 :            : #endif
     172                 :            : 
     173                 :            : /**
     174                 :            :  * scsi_finish_command - cleanup and pass command back to upper layer
     175                 :            :  * @cmd: the command
     176                 :            :  *
     177                 :            :  * Description: Pass command off to upper layer for finishing of I/O
     178                 :            :  *              request, waking processes that are waiting on results,
     179                 :            :  *              etc.
     180                 :            :  */
     181                 :          0 : void scsi_finish_command(struct scsi_cmnd *cmd)
     182                 :            : {
     183                 :          0 :         struct scsi_device *sdev = cmd->device;
     184                 :            :         struct scsi_target *starget = scsi_target(sdev);
     185                 :          0 :         struct Scsi_Host *shost = sdev->host;
     186                 :            :         struct scsi_driver *drv;
     187                 :            :         unsigned int good_bytes;
     188                 :            : 
     189                 :          0 :         scsi_device_unbusy(sdev);
     190                 :            : 
     191                 :            :         /*
     192                 :            :          * Clear the flags that say that the device/target/host is no longer
     193                 :            :          * capable of accepting new commands.
     194                 :            :          */
     195         [ #  # ]:          0 :         if (atomic_read(&shost->host_blocked))
     196                 :            :                 atomic_set(&shost->host_blocked, 0);
     197         [ #  # ]:          0 :         if (atomic_read(&starget->target_blocked))
     198                 :            :                 atomic_set(&starget->target_blocked, 0);
     199                 :            :         if (atomic_read(&sdev->device_blocked))
     200                 :            :                 atomic_set(&sdev->device_blocked, 0);
     201                 :            : 
     202                 :            :         /*
     203                 :            :          * If we have valid sense information, then some kind of recovery
     204                 :            :          * must have taken place.  Make a note of this.
     205                 :            :          */
     206         [ #  # ]:          0 :         if (SCSI_SENSE_VALID(cmd))
     207                 :          0 :                 cmd->result |= (DRIVER_SENSE << 24);
     208                 :            : 
     209                 :            :         SCSI_LOG_MLCOMPLETE(4, sdev_printk(KERN_INFO, sdev,
     210                 :            :                                 "Notifying upper driver of completion "
     211                 :            :                                 "(result %x)\n", cmd->result));
     212                 :            : 
     213                 :            :         good_bytes = scsi_bufflen(cmd);
     214         [ #  # ]:          0 :         if (!blk_rq_is_passthrough(cmd->request)) {
     215                 :            :                 int old_good_bytes = good_bytes;
     216                 :            :                 drv = scsi_cmd_to_driver(cmd);
     217         [ #  # ]:          0 :                 if (drv->done)
     218                 :          0 :                         good_bytes = drv->done(cmd);
     219                 :            :                 /*
     220                 :            :                  * USB may not give sense identifying bad sector and
     221                 :            :                  * simply return a residue instead, so subtract off the
     222                 :            :                  * residue if drv->done() error processing indicates no
     223                 :            :                  * change to the completion length.
     224                 :            :                  */
     225         [ #  # ]:          0 :                 if (good_bytes == old_good_bytes)
     226                 :          0 :                         good_bytes -= scsi_get_resid(cmd);
     227                 :            :         }
     228                 :          0 :         scsi_io_completion(cmd, good_bytes);
     229                 :          0 : }
     230                 :            : 
     231                 :            : /**
     232                 :            :  * scsi_change_queue_depth - change a device's queue depth
     233                 :            :  * @sdev: SCSI Device in question
     234                 :            :  * @depth: number of commands allowed to be queued to the driver
     235                 :            :  *
     236                 :            :  * Sets the device queue depth and returns the new value.
     237                 :            :  */
     238                 :          0 : int scsi_change_queue_depth(struct scsi_device *sdev, int depth)
     239                 :            : {
     240         [ #  # ]:          0 :         if (depth > 0) {
     241                 :          0 :                 sdev->queue_depth = depth;
     242                 :          0 :                 wmb();
     243                 :            :         }
     244                 :            : 
     245         [ #  # ]:          0 :         if (sdev->request_queue)
     246                 :          0 :                 blk_set_queue_depth(sdev->request_queue, depth);
     247                 :            : 
     248                 :          0 :         return sdev->queue_depth;
     249                 :            : }
     250                 :            : EXPORT_SYMBOL(scsi_change_queue_depth);
     251                 :            : 
     252                 :            : /**
     253                 :            :  * scsi_track_queue_full - track QUEUE_FULL events to adjust queue depth
     254                 :            :  * @sdev: SCSI Device in question
     255                 :            :  * @depth: Current number of outstanding SCSI commands on this device,
     256                 :            :  *         not counting the one returned as QUEUE_FULL.
     257                 :            :  *
     258                 :            :  * Description: This function will track successive QUEUE_FULL events on a
     259                 :            :  *              specific SCSI device to determine if and when there is a
     260                 :            :  *              need to adjust the queue depth on the device.
     261                 :            :  *
     262                 :            :  * Returns:     0 - No change needed, >0 - Adjust queue depth to this new depth,
     263                 :            :  *              -1 - Drop back to untagged operation using host->cmd_per_lun
     264                 :            :  *                      as the untagged command depth
     265                 :            :  *
     266                 :            :  * Lock Status: None held on entry
     267                 :            :  *
     268                 :            :  * Notes:       Low level drivers may call this at any time and we will do
     269                 :            :  *              "The Right Thing."  We are interrupt context safe.
     270                 :            :  */
     271                 :          0 : int scsi_track_queue_full(struct scsi_device *sdev, int depth)
     272                 :            : {
     273                 :            : 
     274                 :            :         /*
     275                 :            :          * Don't let QUEUE_FULLs on the same
     276                 :            :          * jiffies count, they could all be from
     277                 :            :          * same event.
     278                 :            :          */
     279         [ #  # ]:          0 :         if ((jiffies >> 4) == (sdev->last_queue_full_time >> 4))
     280                 :            :                 return 0;
     281                 :            : 
     282                 :          0 :         sdev->last_queue_full_time = jiffies;
     283         [ #  # ]:          0 :         if (sdev->last_queue_full_depth != depth) {
     284                 :          0 :                 sdev->last_queue_full_count = 1;
     285                 :          0 :                 sdev->last_queue_full_depth = depth;
     286                 :            :         } else {
     287                 :          0 :                 sdev->last_queue_full_count++;
     288                 :            :         }
     289                 :            : 
     290         [ #  # ]:          0 :         if (sdev->last_queue_full_count <= 10)
     291                 :            :                 return 0;
     292                 :            : 
     293                 :          0 :         return scsi_change_queue_depth(sdev, depth);
     294                 :            : }
     295                 :            : EXPORT_SYMBOL(scsi_track_queue_full);
     296                 :            : 
     297                 :            : /**
     298                 :            :  * scsi_vpd_inquiry - Request a device provide us with a VPD page
     299                 :            :  * @sdev: The device to ask
     300                 :            :  * @buffer: Where to put the result
     301                 :            :  * @page: Which Vital Product Data to return
     302                 :            :  * @len: The length of the buffer
     303                 :            :  *
     304                 :            :  * This is an internal helper function.  You probably want to use
     305                 :            :  * scsi_get_vpd_page instead.
     306                 :            :  *
     307                 :            :  * Returns size of the vpd page on success or a negative error number.
     308                 :            :  */
     309                 :          0 : static int scsi_vpd_inquiry(struct scsi_device *sdev, unsigned char *buffer,
     310                 :            :                                                         u8 page, unsigned len)
     311                 :            : {
     312                 :            :         int result;
     313                 :            :         unsigned char cmd[16];
     314                 :            : 
     315         [ #  # ]:          0 :         if (len < 4)
     316                 :            :                 return -EINVAL;
     317                 :            : 
     318                 :          0 :         cmd[0] = INQUIRY;
     319                 :          0 :         cmd[1] = 1;             /* EVPD */
     320                 :          0 :         cmd[2] = page;
     321                 :          0 :         cmd[3] = len >> 8;
     322                 :          0 :         cmd[4] = len & 0xff;
     323                 :          0 :         cmd[5] = 0;             /* Control byte */
     324                 :            : 
     325                 :            :         /*
     326                 :            :          * I'm not convinced we need to try quite this hard to get VPD, but
     327                 :            :          * all the existing users tried this hard.
     328                 :            :          */
     329                 :            :         result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer,
     330                 :            :                                   len, NULL, 30 * HZ, 3, NULL);
     331         [ #  # ]:          0 :         if (result)
     332                 :            :                 return -EIO;
     333                 :            : 
     334                 :            :         /* Sanity check that we got the page back that we asked for */
     335         [ #  # ]:          0 :         if (buffer[1] != page)
     336                 :            :                 return -EIO;
     337                 :            : 
     338                 :          0 :         return get_unaligned_be16(&buffer[2]) + 4;
     339                 :            : }
     340                 :            : 
     341                 :            : /**
     342                 :            :  * scsi_get_vpd_page - Get Vital Product Data from a SCSI device
     343                 :            :  * @sdev: The device to ask
     344                 :            :  * @page: Which Vital Product Data to return
     345                 :            :  * @buf: where to store the VPD
     346                 :            :  * @buf_len: number of bytes in the VPD buffer area
     347                 :            :  *
     348                 :            :  * SCSI devices may optionally supply Vital Product Data.  Each 'page'
     349                 :            :  * of VPD is defined in the appropriate SCSI document (eg SPC, SBC).
     350                 :            :  * If the device supports this VPD page, this routine returns a pointer
     351                 :            :  * to a buffer containing the data from that page.  The caller is
     352                 :            :  * responsible for calling kfree() on this pointer when it is no longer
     353                 :            :  * needed.  If we cannot retrieve the VPD page this routine returns %NULL.
     354                 :            :  */
     355                 :          0 : int scsi_get_vpd_page(struct scsi_device *sdev, u8 page, unsigned char *buf,
     356                 :            :                       int buf_len)
     357                 :            : {
     358                 :            :         int i, result;
     359                 :            : 
     360         [ #  # ]:          0 :         if (sdev->skip_vpd_pages)
     361                 :            :                 goto fail;
     362                 :            : 
     363                 :            :         /* Ask for all the pages supported by this device */
     364                 :          0 :         result = scsi_vpd_inquiry(sdev, buf, 0, buf_len);
     365         [ #  # ]:          0 :         if (result < 4)
     366                 :            :                 goto fail;
     367                 :            : 
     368                 :            :         /* If the user actually wanted this page, we can skip the rest */
     369         [ #  # ]:          0 :         if (page == 0)
     370                 :            :                 return 0;
     371                 :            : 
     372         [ #  # ]:          0 :         for (i = 4; i < min(result, buf_len); i++)
     373         [ #  # ]:          0 :                 if (buf[i] == page)
     374                 :            :                         goto found;
     375                 :            : 
     376         [ #  # ]:          0 :         if (i < result && i >= buf_len)
     377                 :            :                 /* ran off the end of the buffer, give us benefit of doubt */
     378                 :            :                 goto found;
     379                 :            :         /* The device claims it doesn't support the requested page */
     380                 :            :         goto fail;
     381                 :            : 
     382                 :            :  found:
     383                 :          0 :         result = scsi_vpd_inquiry(sdev, buf, page, buf_len);
     384         [ #  # ]:          0 :         if (result < 0)
     385                 :            :                 goto fail;
     386                 :            : 
     387                 :            :         return 0;
     388                 :            : 
     389                 :            :  fail:
     390                 :            :         return -EINVAL;
     391                 :            : }
     392                 :            : EXPORT_SYMBOL_GPL(scsi_get_vpd_page);
     393                 :            : 
     394                 :            : /**
     395                 :            :  * scsi_get_vpd_buf - Get Vital Product Data from a SCSI device
     396                 :            :  * @sdev: The device to ask
     397                 :            :  * @page: Which Vital Product Data to return
     398                 :            :  *
     399                 :            :  * Returns %NULL upon failure.
     400                 :            :  */
     401                 :          0 : static struct scsi_vpd *scsi_get_vpd_buf(struct scsi_device *sdev, u8 page)
     402                 :            : {
     403                 :            :         struct scsi_vpd *vpd_buf;
     404                 :            :         int vpd_len = SCSI_VPD_PG_LEN, result;
     405                 :            : 
     406                 :            : retry_pg:
     407                 :          0 :         vpd_buf = kmalloc(sizeof(*vpd_buf) + vpd_len, GFP_KERNEL);
     408         [ #  # ]:          0 :         if (!vpd_buf)
     409                 :            :                 return NULL;
     410                 :            : 
     411                 :          0 :         result = scsi_vpd_inquiry(sdev, vpd_buf->data, page, vpd_len);
     412         [ #  # ]:          0 :         if (result < 0) {
     413                 :          0 :                 kfree(vpd_buf);
     414                 :          0 :                 return NULL;
     415                 :            :         }
     416         [ #  # ]:          0 :         if (result > vpd_len) {
     417                 :            :                 vpd_len = result;
     418                 :          0 :                 kfree(vpd_buf);
     419                 :          0 :                 goto retry_pg;
     420                 :            :         }
     421                 :            : 
     422                 :          0 :         vpd_buf->len = result;
     423                 :            : 
     424                 :          0 :         return vpd_buf;
     425                 :            : }
     426                 :            : 
     427                 :          0 : static void scsi_update_vpd_page(struct scsi_device *sdev, u8 page,
     428                 :            :                                  struct scsi_vpd __rcu **sdev_vpd_buf)
     429                 :            : {
     430                 :            :         struct scsi_vpd *vpd_buf;
     431                 :            : 
     432                 :          0 :         vpd_buf = scsi_get_vpd_buf(sdev, page);
     433         [ #  # ]:          0 :         if (!vpd_buf)
     434                 :          0 :                 return;
     435                 :            : 
     436                 :          0 :         mutex_lock(&sdev->inquiry_mutex);
     437                 :          0 :         rcu_swap_protected(*sdev_vpd_buf, vpd_buf,
     438                 :            :                            lockdep_is_held(&sdev->inquiry_mutex));
     439                 :          0 :         mutex_unlock(&sdev->inquiry_mutex);
     440                 :            : 
     441         [ #  # ]:          0 :         if (vpd_buf)
     442         [ #  # ]:          0 :                 kfree_rcu(vpd_buf, rcu);
     443                 :            : }
     444                 :            : 
     445                 :            : /**
     446                 :            :  * scsi_attach_vpd - Attach Vital Product Data to a SCSI device structure
     447                 :            :  * @sdev: The device to ask
     448                 :            :  *
     449                 :            :  * Attach the 'Device Identification' VPD page (0x83) and the
     450                 :            :  * 'Unit Serial Number' VPD page (0x80) to a SCSI device
     451                 :            :  * structure. This information can be used to identify the device
     452                 :            :  * uniquely.
     453                 :            :  */
     454                 :          0 : void scsi_attach_vpd(struct scsi_device *sdev)
     455                 :            : {
     456                 :            :         int i;
     457                 :            :         struct scsi_vpd *vpd_buf;
     458                 :            : 
     459         [ #  # ]:          0 :         if (!scsi_device_supports_vpd(sdev))
     460                 :            :                 return;
     461                 :            : 
     462                 :            :         /* Ask for all the pages supported by this device */
     463                 :          0 :         vpd_buf = scsi_get_vpd_buf(sdev, 0);
     464         [ #  # ]:          0 :         if (!vpd_buf)
     465                 :            :                 return;
     466                 :            : 
     467         [ #  # ]:          0 :         for (i = 4; i < vpd_buf->len; i++) {
     468         [ #  # ]:          0 :                 if (vpd_buf->data[i] == 0x80)
     469                 :          0 :                         scsi_update_vpd_page(sdev, 0x80, &sdev->vpd_pg80);
     470         [ #  # ]:          0 :                 if (vpd_buf->data[i] == 0x83)
     471                 :          0 :                         scsi_update_vpd_page(sdev, 0x83, &sdev->vpd_pg83);
     472                 :            :         }
     473                 :          0 :         kfree(vpd_buf);
     474                 :            : }
     475                 :            : 
     476                 :            : /**
     477                 :            :  * scsi_report_opcode - Find out if a given command opcode is supported
     478                 :            :  * @sdev:       scsi device to query
     479                 :            :  * @buffer:     scratch buffer (must be at least 20 bytes long)
     480                 :            :  * @len:        length of buffer
     481                 :            :  * @opcode:     opcode for command to look up
     482                 :            :  *
     483                 :            :  * Uses the REPORT SUPPORTED OPERATION CODES to look up the given
     484                 :            :  * opcode. Returns -EINVAL if RSOC fails, 0 if the command opcode is
     485                 :            :  * unsupported and 1 if the device claims to support the command.
     486                 :            :  */
     487                 :          0 : int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
     488                 :            :                        unsigned int len, unsigned char opcode)
     489                 :            : {
     490                 :            :         unsigned char cmd[16];
     491                 :            :         struct scsi_sense_hdr sshdr;
     492                 :            :         int result;
     493                 :            : 
     494   [ #  #  #  # ]:          0 :         if (sdev->no_report_opcodes || sdev->scsi_level < SCSI_SPC_3)
     495                 :            :                 return -EINVAL;
     496                 :            : 
     497                 :          0 :         memset(cmd, 0, 16);
     498                 :          0 :         cmd[0] = MAINTENANCE_IN;
     499                 :          0 :         cmd[1] = MI_REPORT_SUPPORTED_OPERATION_CODES;
     500                 :          0 :         cmd[2] = 1;             /* One command format */
     501                 :          0 :         cmd[3] = opcode;
     502                 :            :         put_unaligned_be32(len, &cmd[6]);
     503                 :          0 :         memset(buffer, 0, len);
     504                 :            : 
     505                 :            :         result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
     506                 :            :                                   &sshdr, 30 * HZ, 3, NULL);
     507                 :            : 
     508   [ #  #  #  #  :          0 :         if (result && scsi_sense_valid(&sshdr) &&
                   #  # ]
     509         [ #  # ]:          0 :             sshdr.sense_key == ILLEGAL_REQUEST &&
     510         [ #  # ]:          0 :             (sshdr.asc == 0x20 || sshdr.asc == 0x24) && sshdr.ascq == 0x00)
     511                 :            :                 return -EINVAL;
     512                 :            : 
     513         [ #  # ]:          0 :         if ((buffer[1] & 3) == 3) /* Command supported */
     514                 :            :                 return 1;
     515                 :            : 
     516                 :          0 :         return 0;
     517                 :            : }
     518                 :            : EXPORT_SYMBOL(scsi_report_opcode);
     519                 :            : 
     520                 :            : /**
     521                 :            :  * scsi_device_get  -  get an additional reference to a scsi_device
     522                 :            :  * @sdev:       device to get a reference to
     523                 :            :  *
     524                 :            :  * Description: Gets a reference to the scsi_device and increments the use count
     525                 :            :  * of the underlying LLDD module.  You must hold host_lock of the
     526                 :            :  * parent Scsi_Host or already have a reference when calling this.
     527                 :            :  *
     528                 :            :  * This will fail if a device is deleted or cancelled, or when the LLD module
     529                 :            :  * is in the process of being unloaded.
     530                 :            :  */
     531                 :          0 : int scsi_device_get(struct scsi_device *sdev)
     532                 :            : {
     533         [ #  # ]:          0 :         if (sdev->sdev_state == SDEV_DEL || sdev->sdev_state == SDEV_CANCEL)
     534                 :            :                 goto fail;
     535         [ #  # ]:          0 :         if (!get_device(&sdev->sdev_gendev))
     536                 :            :                 goto fail;
     537         [ #  # ]:          0 :         if (!try_module_get(sdev->host->hostt->module))
     538                 :            :                 goto fail_put_device;
     539                 :            :         return 0;
     540                 :            : 
     541                 :            : fail_put_device:
     542                 :          0 :         put_device(&sdev->sdev_gendev);
     543                 :            : fail:
     544                 :            :         return -ENXIO;
     545                 :            : }
     546                 :            : EXPORT_SYMBOL(scsi_device_get);
     547                 :            : 
     548                 :            : /**
     549                 :            :  * scsi_device_put  -  release a reference to a scsi_device
     550                 :            :  * @sdev:       device to release a reference on.
     551                 :            :  *
     552                 :            :  * Description: Release a reference to the scsi_device and decrements the use
     553                 :            :  * count of the underlying LLDD module.  The device is freed once the last
     554                 :            :  * user vanishes.
     555                 :            :  */
     556                 :          0 : void scsi_device_put(struct scsi_device *sdev)
     557                 :            : {
     558                 :          0 :         module_put(sdev->host->hostt->module);
     559                 :          0 :         put_device(&sdev->sdev_gendev);
     560                 :          0 : }
     561                 :            : EXPORT_SYMBOL(scsi_device_put);
     562                 :            : 
     563                 :            : /* helper for shost_for_each_device, see that for documentation */
     564                 :          0 : struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *shost,
     565                 :            :                                            struct scsi_device *prev)
     566                 :            : {
     567         [ #  # ]:          0 :         struct list_head *list = (prev ? &prev->siblings : &shost->__devices);
     568                 :            :         struct scsi_device *next = NULL;
     569                 :            :         unsigned long flags;
     570                 :            : 
     571                 :          0 :         spin_lock_irqsave(shost->host_lock, flags);
     572         [ #  # ]:          0 :         while (list->next != &shost->__devices) {
     573                 :          0 :                 next = list_entry(list->next, struct scsi_device, siblings);
     574                 :            :                 /* skip devices that we can't get a reference to */
     575         [ #  # ]:          0 :                 if (!scsi_device_get(next))
     576                 :            :                         break;
     577                 :            :                 next = NULL;
     578                 :          0 :                 list = list->next;
     579                 :            :         }
     580                 :          0 :         spin_unlock_irqrestore(shost->host_lock, flags);
     581                 :            : 
     582         [ #  # ]:          0 :         if (prev)
     583                 :          0 :                 scsi_device_put(prev);
     584                 :          0 :         return next;
     585                 :            : }
     586                 :            : EXPORT_SYMBOL(__scsi_iterate_devices);
     587                 :            : 
     588                 :            : /**
     589                 :            :  * starget_for_each_device  -  helper to walk all devices of a target
     590                 :            :  * @starget:    target whose devices we want to iterate over.
     591                 :            :  * @data:       Opaque passed to each function call.
     592                 :            :  * @fn:         Function to call on each device
     593                 :            :  *
     594                 :            :  * This traverses over each device of @starget.  The devices have
     595                 :            :  * a reference that must be released by scsi_host_put when breaking
     596                 :            :  * out of the loop.
     597                 :            :  */
     598                 :          0 : void starget_for_each_device(struct scsi_target *starget, void *data,
     599                 :            :                      void (*fn)(struct scsi_device *, void *))
     600                 :            : {
     601                 :          0 :         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
     602                 :            :         struct scsi_device *sdev;
     603                 :            : 
     604         [ #  # ]:          0 :         shost_for_each_device(sdev, shost) {
     605   [ #  #  #  # ]:          0 :                 if ((sdev->channel == starget->channel) &&
     606                 :          0 :                     (sdev->id == starget->id))
     607                 :          0 :                         fn(sdev, data);
     608                 :            :         }
     609                 :          0 : }
     610                 :            : EXPORT_SYMBOL(starget_for_each_device);
     611                 :            : 
     612                 :            : /**
     613                 :            :  * __starget_for_each_device - helper to walk all devices of a target (UNLOCKED)
     614                 :            :  * @starget:    target whose devices we want to iterate over.
     615                 :            :  * @data:       parameter for callback @fn()
     616                 :            :  * @fn:         callback function that is invoked for each device
     617                 :            :  *
     618                 :            :  * This traverses over each device of @starget.  It does _not_
     619                 :            :  * take a reference on the scsi_device, so the whole loop must be
     620                 :            :  * protected by shost->host_lock.
     621                 :            :  *
     622                 :            :  * Note:  The only reason why drivers would want to use this is because
     623                 :            :  * they need to access the device list in irq context.  Otherwise you
     624                 :            :  * really want to use starget_for_each_device instead.
     625                 :            :  **/
     626                 :          0 : void __starget_for_each_device(struct scsi_target *starget, void *data,
     627                 :            :                                void (*fn)(struct scsi_device *, void *))
     628                 :            : {
     629                 :          0 :         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
     630                 :            :         struct scsi_device *sdev;
     631                 :            : 
     632         [ #  # ]:          0 :         __shost_for_each_device(sdev, shost) {
     633   [ #  #  #  # ]:          0 :                 if ((sdev->channel == starget->channel) &&
     634                 :          0 :                     (sdev->id == starget->id))
     635                 :          0 :                         fn(sdev, data);
     636                 :            :         }
     637                 :          0 : }
     638                 :            : EXPORT_SYMBOL(__starget_for_each_device);
     639                 :            : 
     640                 :            : /**
     641                 :            :  * __scsi_device_lookup_by_target - find a device given the target (UNLOCKED)
     642                 :            :  * @starget:    SCSI target pointer
     643                 :            :  * @lun:        SCSI Logical Unit Number
     644                 :            :  *
     645                 :            :  * Description: Looks up the scsi_device with the specified @lun for a given
     646                 :            :  * @starget.  The returned scsi_device does not have an additional
     647                 :            :  * reference.  You must hold the host's host_lock over this call and
     648                 :            :  * any access to the returned scsi_device. A scsi_device in state
     649                 :            :  * SDEV_DEL is skipped.
     650                 :            :  *
     651                 :            :  * Note:  The only reason why drivers should use this is because
     652                 :            :  * they need to access the device list in irq context.  Otherwise you
     653                 :            :  * really want to use scsi_device_lookup_by_target instead.
     654                 :            :  **/
     655                 :          0 : struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *starget,
     656                 :            :                                                    u64 lun)
     657                 :            : {
     658                 :            :         struct scsi_device *sdev;
     659                 :            : 
     660   [ #  #  #  # ]:          0 :         list_for_each_entry(sdev, &starget->devices, same_target_siblings) {
     661   [ #  #  #  # ]:          0 :                 if (sdev->sdev_state == SDEV_DEL)
     662                 :          0 :                         continue;
     663   [ #  #  #  # ]:          0 :                 if (sdev->lun ==lun)
     664                 :          0 :                         return sdev;
     665                 :            :         }
     666                 :            : 
     667                 :            :         return NULL;
     668                 :            : }
     669                 :            : EXPORT_SYMBOL(__scsi_device_lookup_by_target);
     670                 :            : 
     671                 :            : /**
     672                 :            :  * scsi_device_lookup_by_target - find a device given the target
     673                 :            :  * @starget:    SCSI target pointer
     674                 :            :  * @lun:        SCSI Logical Unit Number
     675                 :            :  *
     676                 :            :  * Description: Looks up the scsi_device with the specified @lun for a given
     677                 :            :  * @starget.  The returned scsi_device has an additional reference that
     678                 :            :  * needs to be released with scsi_device_put once you're done with it.
     679                 :            :  **/
     680                 :          0 : struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget,
     681                 :            :                                                  u64 lun)
     682                 :            : {
     683                 :            :         struct scsi_device *sdev;
     684                 :          0 :         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
     685                 :            :         unsigned long flags;
     686                 :            : 
     687                 :          0 :         spin_lock_irqsave(shost->host_lock, flags);
     688                 :            :         sdev = __scsi_device_lookup_by_target(starget, lun);
     689   [ #  #  #  # ]:          0 :         if (sdev && scsi_device_get(sdev))
     690                 :            :                 sdev = NULL;
     691                 :          0 :         spin_unlock_irqrestore(shost->host_lock, flags);
     692                 :            : 
     693                 :          0 :         return sdev;
     694                 :            : }
     695                 :            : EXPORT_SYMBOL(scsi_device_lookup_by_target);
     696                 :            : 
     697                 :            : /**
     698                 :            :  * __scsi_device_lookup - find a device given the host (UNLOCKED)
     699                 :            :  * @shost:      SCSI host pointer
     700                 :            :  * @channel:    SCSI channel (zero if only one channel)
     701                 :            :  * @id:         SCSI target number (physical unit number)
     702                 :            :  * @lun:        SCSI Logical Unit Number
     703                 :            :  *
     704                 :            :  * Description: Looks up the scsi_device with the specified @channel, @id, @lun
     705                 :            :  * for a given host. The returned scsi_device does not have an additional
     706                 :            :  * reference.  You must hold the host's host_lock over this call and any access
     707                 :            :  * to the returned scsi_device.
     708                 :            :  *
     709                 :            :  * Note:  The only reason why drivers would want to use this is because
     710                 :            :  * they need to access the device list in irq context.  Otherwise you
     711                 :            :  * really want to use scsi_device_lookup instead.
     712                 :            :  **/
     713                 :          0 : struct scsi_device *__scsi_device_lookup(struct Scsi_Host *shost,
     714                 :            :                 uint channel, uint id, u64 lun)
     715                 :            : {
     716                 :            :         struct scsi_device *sdev;
     717                 :            : 
     718         [ #  # ]:          0 :         list_for_each_entry(sdev, &shost->__devices, siblings) {
     719         [ #  # ]:          0 :                 if (sdev->sdev_state == SDEV_DEL)
     720                 :          0 :                         continue;
     721   [ #  #  #  #  :          0 :                 if (sdev->channel == channel && sdev->id == id &&
                   #  # ]
     722                 :          0 :                                 sdev->lun ==lun)
     723                 :          0 :                         return sdev;
     724                 :            :         }
     725                 :            : 
     726                 :            :         return NULL;
     727                 :            : }
     728                 :            : EXPORT_SYMBOL(__scsi_device_lookup);
     729                 :            : 
     730                 :            : /**
     731                 :            :  * scsi_device_lookup - find a device given the host
     732                 :            :  * @shost:      SCSI host pointer
     733                 :            :  * @channel:    SCSI channel (zero if only one channel)
     734                 :            :  * @id:         SCSI target number (physical unit number)
     735                 :            :  * @lun:        SCSI Logical Unit Number
     736                 :            :  *
     737                 :            :  * Description: Looks up the scsi_device with the specified @channel, @id, @lun
     738                 :            :  * for a given host.  The returned scsi_device has an additional reference that
     739                 :            :  * needs to be released with scsi_device_put once you're done with it.
     740                 :            :  **/
     741                 :          0 : struct scsi_device *scsi_device_lookup(struct Scsi_Host *shost,
     742                 :            :                 uint channel, uint id, u64 lun)
     743                 :            : {
     744                 :            :         struct scsi_device *sdev;
     745                 :            :         unsigned long flags;
     746                 :            : 
     747                 :          0 :         spin_lock_irqsave(shost->host_lock, flags);
     748                 :          0 :         sdev = __scsi_device_lookup(shost, channel, id, lun);
     749   [ #  #  #  # ]:          0 :         if (sdev && scsi_device_get(sdev))
     750                 :            :                 sdev = NULL;
     751                 :          0 :         spin_unlock_irqrestore(shost->host_lock, flags);
     752                 :            : 
     753                 :          0 :         return sdev;
     754                 :            : }
     755                 :            : EXPORT_SYMBOL(scsi_device_lookup);
     756                 :            : 
     757                 :            : MODULE_DESCRIPTION("SCSI core");
     758                 :            : MODULE_LICENSE("GPL");
     759                 :            : 
     760                 :            : module_param(scsi_logging_level, int, S_IRUGO|S_IWUSR);
     761                 :            : MODULE_PARM_DESC(scsi_logging_level, "a bit mask of logging levels");
     762                 :            : 
     763                 :            : /* This should go away in the future, it doesn't do anything anymore */
     764                 :            : bool scsi_use_blk_mq = true;
     765                 :            : module_param_named(use_blk_mq, scsi_use_blk_mq, bool, S_IWUSR | S_IRUGO);
     766                 :            : 
     767                 :        207 : static int __init init_scsi(void)
     768                 :            : {
     769                 :            :         int error;
     770                 :            : 
     771                 :        207 :         error = scsi_init_queue();
     772         [ +  - ]:        207 :         if (error)
     773                 :            :                 return error;
     774                 :            :         error = scsi_init_procfs();
     775                 :            :         if (error)
     776                 :            :                 goto cleanup_queue;
     777                 :        207 :         error = scsi_init_devinfo();
     778         [ +  - ]:        207 :         if (error)
     779                 :            :                 goto cleanup_procfs;
     780                 :        207 :         error = scsi_init_hosts();
     781         [ +  - ]:        207 :         if (error)
     782                 :            :                 goto cleanup_devlist;
     783                 :        207 :         error = scsi_init_sysctl();
     784         [ +  - ]:        207 :         if (error)
     785                 :            :                 goto cleanup_hosts;
     786                 :        207 :         error = scsi_sysfs_register();
     787         [ +  - ]:        207 :         if (error)
     788                 :            :                 goto cleanup_sysctl;
     789                 :            : 
     790                 :            :         scsi_netlink_init();
     791                 :            : 
     792                 :        207 :         printk(KERN_NOTICE "SCSI subsystem initialized\n");
     793                 :        207 :         return 0;
     794                 :            : 
     795                 :            : cleanup_sysctl:
     796                 :          0 :         scsi_exit_sysctl();
     797                 :            : cleanup_hosts:
     798                 :          0 :         scsi_exit_hosts();
     799                 :            : cleanup_devlist:
     800                 :          0 :         scsi_exit_devinfo();
     801                 :            : cleanup_procfs:
     802                 :            :         scsi_exit_procfs();
     803                 :            : cleanup_queue:
     804                 :          0 :         scsi_exit_queue();
     805                 :          0 :         printk(KERN_ERR "SCSI subsystem failed to initialize, error = %d\n",
     806                 :            :                -error);
     807                 :          0 :         return error;
     808                 :            : }
     809                 :            : 
     810                 :          0 : static void __exit exit_scsi(void)
     811                 :            : {
     812                 :            :         scsi_netlink_exit();
     813                 :          0 :         scsi_sysfs_unregister();
     814                 :          0 :         scsi_exit_sysctl();
     815                 :          0 :         scsi_exit_hosts();
     816                 :          0 :         scsi_exit_devinfo();
     817                 :            :         scsi_exit_procfs();
     818                 :          0 :         scsi_exit_queue();
     819                 :          0 : }
     820                 :            : 
     821                 :            : subsys_initcall(init_scsi);
     822                 :            : module_exit(exit_scsi);

Generated by: LCOV version 1.14