LCOV - code coverage report
Current view: top level - include/scsi - scsi.h (source / functions) Hit Total Coverage
Test: gcov_data_raspi2_real_modules_combined.info Lines: 0 6 0.0 %
Date: 2020-09-30 20:25:40 Functions: 0 0 -
Branches: 0 54 0.0 %

           Branch data     Line data    Source code
       1                 :            : /* SPDX-License-Identifier: GPL-2.0 */
       2                 :            : /*
       3                 :            :  * This header file contains public constants and structures used by
       4                 :            :  * the SCSI initiator code.
       5                 :            :  */
       6                 :            : #ifndef _SCSI_SCSI_H
       7                 :            : #define _SCSI_SCSI_H
       8                 :            : 
       9                 :            : #include <linux/types.h>
      10                 :            : #include <linux/scatterlist.h>
      11                 :            : #include <linux/kernel.h>
      12                 :            : #include <scsi/scsi_common.h>
      13                 :            : #include <scsi/scsi_proto.h>
      14                 :            : 
      15                 :            : struct scsi_cmnd;
      16                 :            : 
      17                 :            : enum scsi_timeouts {
      18                 :            :         SCSI_DEFAULT_EH_TIMEOUT         = 10 * HZ,
      19                 :            : };
      20                 :            : 
      21                 :            : /*
      22                 :            :  * DIX-capable adapters effectively support infinite chaining for the
      23                 :            :  * protection information scatterlist
      24                 :            :  */
      25                 :            : #define SCSI_MAX_PROT_SG_SEGMENTS       0xFFFF
      26                 :            : 
      27                 :            : /*
      28                 :            :  * Special value for scanning to specify scanning or rescanning of all
      29                 :            :  * possible channels, (target) ids, or luns on a given shost.
      30                 :            :  */
      31                 :            : #define SCAN_WILD_CARD  ~0
      32                 :            : 
      33                 :            : /** scsi_status_is_good - check the status return.
      34                 :            :  *
      35                 :            :  * @status: the status passed up from the driver (including host and
      36                 :            :  *          driver components)
      37                 :            :  *
      38                 :            :  * This returns true for known good conditions that may be treated as
      39                 :            :  * command completed normally
      40                 :            :  */
      41                 :            : static inline int scsi_status_is_good(int status)
      42                 :            : {
      43                 :            :         /*
      44                 :            :          * FIXME: bit0 is listed as reserved in SCSI-2, but is
      45                 :            :          * significant in SCSI-3.  For now, we follow the SCSI-2
      46                 :            :          * behaviour and ignore reserved bits.
      47                 :            :          */
      48                 :          0 :         status &= 0xfe;
      49                 :          0 :         return ((status == SAM_STAT_GOOD) ||
      50                 :          0 :                 (status == SAM_STAT_CONDITION_MET) ||
      51                 :            :                 /* Next two "intermediate" statuses are obsolete in SAM-4 */
      52   [ #  #  #  #  :          0 :                 (status == SAM_STAT_INTERMEDIATE) ||
          #  #  #  #  #  
          #  #  #  #  #  
             #  #  #  # ]
      53   [ #  #  #  #  :          0 :                 (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
          #  #  #  #  #  
          #  #  #  #  #  
          #  #  #  #  #  
          #  #  #  #  #  
          #  #  #  #  #  
          #  #  #  #  #  
                   #  # ]
      54                 :            :                 /* FIXME: this is obsolete in SAM-3 */
      55                 :            :                 (status == SAM_STAT_COMMAND_TERMINATED));
      56                 :            : }
      57                 :            : 
      58                 :            : 
      59                 :            : /*
      60                 :            :  * standard mode-select header prepended to all mode-select commands
      61                 :            :  */
      62                 :            : 
      63                 :            : struct ccs_modesel_head {
      64                 :            :         __u8 _r1;                       /* reserved */
      65                 :            :         __u8 medium;            /* device-specific medium type */
      66                 :            :         __u8 _r2;                       /* reserved */
      67                 :            :         __u8 block_desc_length; /* block descriptor length */
      68                 :            :         __u8 density;           /* device-specific density code */
      69                 :            :         __u8 number_blocks_hi;  /* number of blocks in this block desc */
      70                 :            :         __u8 number_blocks_med;
      71                 :            :         __u8 number_blocks_lo;
      72                 :            :         __u8 _r3;
      73                 :            :         __u8 block_length_hi;   /* block length for blocks in this desc */
      74                 :            :         __u8 block_length_med;
      75                 :            :         __u8 block_length_lo;
      76                 :            : };
      77                 :            : 
      78                 :            : /*
      79                 :            :  * The Well Known LUNS (SAM-3) in our int representation of a LUN
      80                 :            :  */
      81                 :            : #define SCSI_W_LUN_BASE 0xc100
      82                 :            : #define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
      83                 :            : #define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
      84                 :            : #define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
      85                 :            : 
      86                 :            : static inline int scsi_is_wlun(u64 lun)
      87                 :            : {
      88                 :          0 :         return (lun & 0xff00) == SCSI_W_LUN_BASE;
      89                 :            : }
      90                 :            : 
      91                 :            : 
      92                 :            : /*
      93                 :            :  *  MESSAGE CODES
      94                 :            :  */
      95                 :            : 
      96                 :            : #define COMMAND_COMPLETE    0x00
      97                 :            : #define EXTENDED_MESSAGE    0x01
      98                 :            : #define     EXTENDED_MODIFY_DATA_POINTER    0x00
      99                 :            : #define     EXTENDED_SDTR                   0x01
     100                 :            : #define     EXTENDED_EXTENDED_IDENTIFY      0x02    /* SCSI-I only */
     101                 :            : #define     EXTENDED_WDTR                   0x03
     102                 :            : #define     EXTENDED_PPR                    0x04
     103                 :            : #define     EXTENDED_MODIFY_BIDI_DATA_PTR   0x05
     104                 :            : #define SAVE_POINTERS       0x02
     105                 :            : #define RESTORE_POINTERS    0x03
     106                 :            : #define DISCONNECT          0x04
     107                 :            : #define INITIATOR_ERROR     0x05
     108                 :            : #define ABORT_TASK_SET      0x06
     109                 :            : #define MESSAGE_REJECT      0x07
     110                 :            : #define NOP                 0x08
     111                 :            : #define MSG_PARITY_ERROR    0x09
     112                 :            : #define LINKED_CMD_COMPLETE 0x0a
     113                 :            : #define LINKED_FLG_CMD_COMPLETE 0x0b
     114                 :            : #define TARGET_RESET        0x0c
     115                 :            : #define ABORT_TASK          0x0d
     116                 :            : #define CLEAR_TASK_SET      0x0e
     117                 :            : #define INITIATE_RECOVERY   0x0f            /* SCSI-II only */
     118                 :            : #define RELEASE_RECOVERY    0x10            /* SCSI-II only */
     119                 :            : #define CLEAR_ACA           0x16
     120                 :            : #define LOGICAL_UNIT_RESET  0x17
     121                 :            : #define SIMPLE_QUEUE_TAG    0x20
     122                 :            : #define HEAD_OF_QUEUE_TAG   0x21
     123                 :            : #define ORDERED_QUEUE_TAG   0x22
     124                 :            : #define IGNORE_WIDE_RESIDUE 0x23
     125                 :            : #define ACA                 0x24
     126                 :            : #define QAS_REQUEST         0x55
     127                 :            : 
     128                 :            : /* Old SCSI2 names, don't use in new code */
     129                 :            : #define BUS_DEVICE_RESET    TARGET_RESET
     130                 :            : #define ABORT               ABORT_TASK_SET
     131                 :            : 
     132                 :            : /*
     133                 :            :  * Host byte codes
     134                 :            :  */
     135                 :            : 
     136                 :            : #define DID_OK          0x00    /* NO error                                */
     137                 :            : #define DID_NO_CONNECT  0x01    /* Couldn't connect before timeout period  */
     138                 :            : #define DID_BUS_BUSY    0x02    /* BUS stayed busy through time out period */
     139                 :            : #define DID_TIME_OUT    0x03    /* TIMED OUT for other reason              */
     140                 :            : #define DID_BAD_TARGET  0x04    /* BAD target.                             */
     141                 :            : #define DID_ABORT       0x05    /* Told to abort for some other reason     */
     142                 :            : #define DID_PARITY      0x06    /* Parity error                            */
     143                 :            : #define DID_ERROR       0x07    /* Internal error                          */
     144                 :            : #define DID_RESET       0x08    /* Reset by somebody.                      */
     145                 :            : #define DID_BAD_INTR    0x09    /* Got an interrupt we weren't expecting.  */
     146                 :            : #define DID_PASSTHROUGH 0x0a    /* Force command past mid-layer            */
     147                 :            : #define DID_SOFT_ERROR  0x0b    /* The low level driver just wish a retry  */
     148                 :            : #define DID_IMM_RETRY   0x0c    /* Retry without decrementing retry count  */
     149                 :            : #define DID_REQUEUE     0x0d    /* Requeue command (no immediate retry) also
     150                 :            :                                  * without decrementing the retry count    */
     151                 :            : #define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution
     152                 :            :                                       * and the driver blocked the port to
     153                 :            :                                       * recover the link. Transport class will
     154                 :            :                                       * retry or fail IO */
     155                 :            : #define DID_TRANSPORT_FAILFAST  0x0f /* Transport class fastfailed the io */
     156                 :            : #define DID_TARGET_FAILURE 0x10 /* Permanent target failure, do not retry on
     157                 :            :                                  * other paths */
     158                 :            : #define DID_NEXUS_FAILURE 0x11  /* Permanent nexus failure, retry on other
     159                 :            :                                  * paths might yield different results */
     160                 :            : #define DID_ALLOC_FAILURE 0x12  /* Space allocation on the device failed */
     161                 :            : #define DID_MEDIUM_ERROR  0x13  /* Medium error */
     162                 :            : #define DRIVER_OK       0x00    /* Driver status                           */
     163                 :            : 
     164                 :            : /*
     165                 :            :  *  These indicate the error that occurred, and what is available.
     166                 :            :  */
     167                 :            : 
     168                 :            : #define DRIVER_BUSY         0x01
     169                 :            : #define DRIVER_SOFT         0x02
     170                 :            : #define DRIVER_MEDIA        0x03
     171                 :            : #define DRIVER_ERROR        0x04
     172                 :            : 
     173                 :            : #define DRIVER_INVALID      0x05
     174                 :            : #define DRIVER_TIMEOUT      0x06
     175                 :            : #define DRIVER_HARD         0x07
     176                 :            : #define DRIVER_SENSE        0x08
     177                 :            : 
     178                 :            : /*
     179                 :            :  * Internal return values.
     180                 :            :  */
     181                 :            : 
     182                 :            : #define NEEDS_RETRY     0x2001
     183                 :            : #define SUCCESS         0x2002
     184                 :            : #define FAILED          0x2003
     185                 :            : #define QUEUED          0x2004
     186                 :            : #define SOFT_ERROR      0x2005
     187                 :            : #define ADD_TO_MLQUEUE  0x2006
     188                 :            : #define TIMEOUT_ERROR   0x2007
     189                 :            : #define SCSI_RETURN_NOT_HANDLED   0x2008
     190                 :            : #define FAST_IO_FAIL    0x2009
     191                 :            : 
     192                 :            : /*
     193                 :            :  * Midlevel queue return values.
     194                 :            :  */
     195                 :            : #define SCSI_MLQUEUE_HOST_BUSY   0x1055
     196                 :            : #define SCSI_MLQUEUE_DEVICE_BUSY 0x1056
     197                 :            : #define SCSI_MLQUEUE_EH_RETRY    0x1057
     198                 :            : #define SCSI_MLQUEUE_TARGET_BUSY 0x1058
     199                 :            : 
     200                 :            : /*
     201                 :            :  *  Use these to separate status msg and our bytes
     202                 :            :  *
     203                 :            :  *  These are set by:
     204                 :            :  *
     205                 :            :  *      status byte = set from target device
     206                 :            :  *      msg_byte    = return status from host adapter itself.
     207                 :            :  *      host_byte   = set by low-level driver to indicate status.
     208                 :            :  *      driver_byte = set by mid-level.
     209                 :            :  */
     210                 :            : #define status_byte(result) (((result) >> 1) & 0x7f)
     211                 :            : #define msg_byte(result)    (((result) >> 8) & 0xff)
     212                 :            : #define host_byte(result)   (((result) >> 16) & 0xff)
     213                 :            : #define driver_byte(result) (((result) >> 24) & 0xff)
     214                 :            : 
     215                 :            : #define sense_class(sense)  (((sense) >> 4) & 0x7)
     216                 :            : #define sense_error(sense)  ((sense) & 0xf)
     217                 :            : #define sense_valid(sense)  ((sense) & 0x80)
     218                 :            : 
     219                 :            : /*
     220                 :            :  * default timeouts
     221                 :            : */
     222                 :            : #define FORMAT_UNIT_TIMEOUT             (2 * 60 * 60 * HZ)
     223                 :            : #define START_STOP_TIMEOUT              (60 * HZ)
     224                 :            : #define MOVE_MEDIUM_TIMEOUT             (5 * 60 * HZ)
     225                 :            : #define READ_ELEMENT_STATUS_TIMEOUT     (5 * 60 * HZ)
     226                 :            : #define READ_DEFECT_DATA_TIMEOUT        (60 * HZ )
     227                 :            : 
     228                 :            : 
     229                 :            : #define IDENTIFY_BASE       0x80
     230                 :            : #define IDENTIFY(can_disconnect, lun)   (IDENTIFY_BASE |\
     231                 :            :                      ((can_disconnect) ?  0x40 : 0) |\
     232                 :            :                      ((lun) & 0x07))
     233                 :            : 
     234                 :            : /*
     235                 :            :  *  struct scsi_device::scsi_level values. For SCSI devices other than those
     236                 :            :  *  prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1)
     237                 :            :  *  where "resp" is a byte array of the response to an INQUIRY. The scsi_level
     238                 :            :  *  variable is visible to the user via sysfs.
     239                 :            :  */
     240                 :            : 
     241                 :            : #define SCSI_UNKNOWN    0
     242                 :            : #define SCSI_1          1
     243                 :            : #define SCSI_1_CCS      2
     244                 :            : #define SCSI_2          3
     245                 :            : #define SCSI_3          4        /* SPC */
     246                 :            : #define SCSI_SPC_2      5
     247                 :            : #define SCSI_SPC_3      6
     248                 :            : 
     249                 :            : /*
     250                 :            :  * INQ PERIPHERAL QUALIFIERS
     251                 :            :  */
     252                 :            : #define SCSI_INQ_PQ_CON         0x00
     253                 :            : #define SCSI_INQ_PQ_NOT_CON     0x01
     254                 :            : #define SCSI_INQ_PQ_NOT_CAP     0x03
     255                 :            : 
     256                 :            : 
     257                 :            : /*
     258                 :            :  * Here are some scsi specific ioctl commands which are sometimes useful.
     259                 :            :  *
     260                 :            :  * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395
     261                 :            :  */
     262                 :            : 
     263                 :            : /* Used to obtain PUN and LUN info.  Conflicts with CDROMAUDIOBUFSIZ */
     264                 :            : #define SCSI_IOCTL_GET_IDLUN            0x5382
     265                 :            : 
     266                 :            : /* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */
     267                 :            : 
     268                 :            : /* Used to obtain the host number of a device. */
     269                 :            : #define SCSI_IOCTL_PROBE_HOST           0x5385
     270                 :            : 
     271                 :            : /* Used to obtain the bus number for a device */
     272                 :            : #define SCSI_IOCTL_GET_BUS_NUMBER       0x5386
     273                 :            : 
     274                 :            : /* Used to obtain the PCI location of a device */
     275                 :            : #define SCSI_IOCTL_GET_PCI              0x5387
     276                 :            : 
     277                 :            : #endif /* _SCSI_SCSI_H */

Generated by: LCOV version 1.14