LCOV - code coverage report

Current view: top level - drivers/net/ethernet/marvell - sky2.c (source / functions) Hit Total Coverage Test: combined.info Lines: 4 2445 0.2 % Date: 2022-04-01 14:17:54 Functions: 1 114 0.9 % Branches: 0 1221 0.0 %

Function Name	Hit count
__gm_phy_read	0
gm_phy_write	0
receive_new	0
roundup_ring_size	0
rx_set_checksum	0
rx_set_rss	0
skb_put_frags	0
sky2_add_filter	0
sky2_all_down	0
sky2_all_up	0
sky2_alloc_buffers	0
sky2_alloc_rx_skbs	0
sky2_autoneg_done	0
sky2_change_mtu	0
sky2_cleanup_module	0
sky2_close	0
sky2_detach	0
sky2_err_intr	0
sky2_fix_features	0
sky2_free_buffers	0
sky2_get_coalesce	0
sky2_get_drvinfo	0
sky2_get_eeprom	0
sky2_get_eeprom_len	0
sky2_get_ethtool_stats	0
sky2_get_link_ksettings	0
sky2_get_msglevel	0
sky2_get_pauseparam	0
sky2_get_regs	0
sky2_get_regs_len	0
sky2_get_ringparam	0
sky2_get_sset_count	0
sky2_get_stats	0
sky2_get_strings	0
sky2_get_wol	0
sky2_gmac_reset	0
sky2_hw_down	0
sky2_hw_error	0
sky2_hw_intr	0
sky2_hw_up	0
sky2_init	0
sky2_init_netdev	0
sky2_intr	0
sky2_ioctl	0
sky2_le_error	0
sky2_led	0
sky2_link_down	0
sky2_link_up	0
sky2_mac_init	0
sky2_mac_intr	0
sky2_name	0
sky2_netpoll	0
sky2_nway_reset	0
sky2_open	0
sky2_phy_init	0
sky2_phy_intr	0
sky2_phy_power_down	0
sky2_phy_power_up	0
sky2_phy_reinit	0
sky2_poll	0
sky2_power_aux	0
sky2_power_on	0
sky2_prefetch_init	0
sky2_probe	0
sky2_qlink_intr	0
sky2_ramset	0
sky2_reattach	0
sky2_receive	0
sky2_remove	0
sky2_reset	0
sky2_restart	0
sky2_resume	0
sky2_rx_alloc	0
sky2_rx_checksum	0
sky2_rx_clean	0
sky2_rx_hung	0
sky2_rx_map_skb	0
sky2_rx_start	0
sky2_rx_stop	0
sky2_rx_submit	0
sky2_rx_unmap_skb	0
sky2_set_coalesce	0
sky2_set_eeprom	0
sky2_set_features	0
sky2_set_ipg	0
sky2_set_link_ksettings	0
sky2_set_mac_address	0
sky2_set_msglevel	0
sky2_set_multicast	0
sky2_set_pauseparam	0
sky2_set_phys_id	0
sky2_set_ringparam	0
sky2_set_tx_stfwd	0
sky2_set_wol	0
sky2_setup_irq	0
sky2_shutdown	0
sky2_status_intr	0
sky2_suspend	0
sky2_test_intr	0
sky2_test_msi	0
sky2_tx_complete	0
sky2_tx_done	0
sky2_tx_reset	0
sky2_tx_timeout	0
sky2_tx_unmap	0
sky2_vlan_mode	0
sky2_vpd_read	0
sky2_vpd_wait	0
sky2_vpd_write	0
sky2_watchdog	0
sky2_wol_init	0
sky2_xmit_frame	0
tx_init	0
sky2_init_module	11

Generated by: LCOV version 1.14