LCOV - code coverage report
Current view: top level - drivers/net/ethernet/marvell - sky2.c (source / functions) Hit Total Coverage
Test: combined.info Lines: 4 2445 0.2 %
Date: 2022-04-01 14:17:54 Functions: 1 114 0.9 %
Branches: 0 1221 0.0 %

Function Name Sort by function name Hit count Sort by hit count
__gm_phy_read 0
gm_phy_write 0
receive_new 0
roundup_ring_size 0
rx_set_checksum 0
rx_set_rss 0
skb_put_frags 0
sky2_add_filter 0
sky2_all_down 0
sky2_all_up 0
sky2_alloc_buffers 0
sky2_alloc_rx_skbs 0
sky2_autoneg_done 0
sky2_change_mtu 0
sky2_cleanup_module 0
sky2_close 0
sky2_detach 0
sky2_err_intr 0
sky2_fix_features 0
sky2_free_buffers 0
sky2_get_coalesce 0
sky2_get_drvinfo 0
sky2_get_eeprom 0
sky2_get_eeprom_len 0
sky2_get_ethtool_stats 0
sky2_get_link_ksettings 0
sky2_get_msglevel 0
sky2_get_pauseparam 0
sky2_get_regs 0
sky2_get_regs_len 0
sky2_get_ringparam 0
sky2_get_sset_count 0
sky2_get_stats 0
sky2_get_strings 0
sky2_get_wol 0
sky2_gmac_reset 0
sky2_hw_down 0
sky2_hw_error 0
sky2_hw_intr 0
sky2_hw_up 0
sky2_init 0
sky2_init_module 11
sky2_init_netdev 0
sky2_intr 0
sky2_ioctl 0
sky2_le_error 0
sky2_led 0
sky2_link_down 0
sky2_link_up 0
sky2_mac_init 0
sky2_mac_intr 0
sky2_name 0
sky2_netpoll 0
sky2_nway_reset 0
sky2_open 0
sky2_phy_init 0
sky2_phy_intr 0
sky2_phy_power_down 0
sky2_phy_power_up 0
sky2_phy_reinit 0
sky2_poll 0
sky2_power_aux 0
sky2_power_on 0
sky2_prefetch_init 0
sky2_probe 0
sky2_qlink_intr 0
sky2_ramset 0
sky2_reattach 0
sky2_receive 0
sky2_remove 0
sky2_reset 0
sky2_restart 0
sky2_resume 0
sky2_rx_alloc 0
sky2_rx_checksum 0
sky2_rx_clean 0
sky2_rx_hung 0
sky2_rx_map_skb 0
sky2_rx_start 0
sky2_rx_stop 0
sky2_rx_submit 0
sky2_rx_unmap_skb 0
sky2_set_coalesce 0
sky2_set_eeprom 0
sky2_set_features 0
sky2_set_ipg 0
sky2_set_link_ksettings 0
sky2_set_mac_address 0
sky2_set_msglevel 0
sky2_set_multicast 0
sky2_set_pauseparam 0
sky2_set_phys_id 0
sky2_set_ringparam 0
sky2_set_tx_stfwd 0
sky2_set_wol 0
sky2_setup_irq 0
sky2_shutdown 0
sky2_status_intr 0
sky2_suspend 0
sky2_test_intr 0
sky2_test_msi 0
sky2_tx_complete 0
sky2_tx_done 0
sky2_tx_reset 0
sky2_tx_timeout 0
sky2_tx_unmap 0
sky2_vlan_mode 0
sky2_vpd_read 0
sky2_vpd_wait 0
sky2_vpd_write 0
sky2_watchdog 0
sky2_wol_init 0
sky2_xmit_frame 0
tx_init 0

Generated by: LCOV version 1.14